Examples of using Can be programmed in English and their translations into Korean
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
WAGO's HMI panels understand HTML5 and can be programmed in CODESYS.
Secret Chat messages can be programmed to self-destruct automatically on both participating devices.
The test procedures of Bench-top Xenon lamp aging test chamber can be programmed freely;
WAGO's HMI panels understand HTML5 and can be programmed in CODESYS.
Single days, weeks, or groups of days can be programmed along with individual on/off times for each group.
HMI panels from WAGO understand HTML5 and can be programmed in CODESYS.
The 32-button expansion module for the 1416 can be programmed to deliver a wide range of features.
HMI panels from WAGO understand HTML5 and can be programmed in CODESYS.
On this alert, the software can be programmed to automatically carry out the trade.
Radio channels can be programmed independently for VOX, scrambler and compander functions.
Touching cycles can be programmed and called up with a few commands.
So if a car can be programmed by the OBD port, we will do it this way.
The switching frequency can be programmed from 200kHz to 2.2MHz and synchronised throughout this range.
The remaining three channels can be programmed in the same method and using whatever start/ end time you wish as well as intensity level.
We have tested and confirmed that the UNO R3 can be programmed in older versions of the IDE.
Its switching frequency can be programmed via a single resistor between 250kHz and 1.5MHz, enabling designers to minimize external component sizes.
Robot paths can be programmed in standard ISO G-code and perfectly smoothed in B&R Automation Studio.
The iSeries meters feature the only LED displays that can be programmed to change color between GREEN, AMBER, or RED at any setpoint or alarm point.
Designed for direct or reverse acting(cooling or heating) control, the CN740 Series can be programmed for simple ON/OFF or more complex PID control functions.
The output can be programmed to track rate or total of the C display.