FLOW RATES in Malay translation

• kadar aliran

Examples of using Flow rates in English and their translations into Malay

Mechanical and vessel industries: flow rate control of natural gas.
Industri mekanikal dan kapal: aliran kadar kawalan gas asli.

Meters pressure/ flow rate made in China
Meter tekanan/ laju aliran buatan China

Flow rate: 1-600T/H.
9000W/ h 220V 50Hz.

The inner wall is smooth and the flow rate is large;
Dinding dalaman licin dan kadar alirannya besar;

its parameters are optimal for operation, and the flow rate is quite small.
parameternya optimum untuk operasi, dan kadar alirannya agak kecil.

The flow rate depends on the opening pressure of the hydraulic check valve
Kadar alir bergantung pada tekanan pembukaan injap semak hidraulik

The Melt Flow Rate Tester is defined as the mass
Penguji kadar alir cair ditakrifkan sebagai jisim

The flow rate is same
Kadar alir sama tetapi kepala adalah 2

The flow rate can be controlled either by a shut-off valve,
Kadar alir boleh dikawal sama ada oleh injap tutup,

The DBD series valve is be able to reach the maximum pressure of 40MPa and flow rate to 300L/min.
The DBD injap siri adalah dapat mencapai tekanan maksimum 40MPa dan kadar alir untuk 300L/ min.

The size and the form of the water holes should be designed selectively according to the different geological conditions and the flow rate.
Saiz dan bentuk lubang air perlu direka secara selektif mengikut keadaan geologi yang berbeza dan kadar alir.

chemicals use Coriolis meter to measure the flow rate.
bahan kimia menggunakan meter Coriolis untuk mengukur laju aliran.

Model GBC ball valve is a through-type ball valve with maximum flow rate and wide scope of operating temperature.
Injap bola GBC model adalah injap bola jenis dengan laju aliran maksimum dan luas ruang operasi.

LLT series spiral rotor heavy oil gas oil flow meter is a highly accurate metrological instrument to measure the flow rate of fluid in pipeline continuously
Siri LLT Lingkaran rotor berat minyak gas minyak meter aliran ini yang sangat tepat metrological instrumen untuk mengukur kadar aliran bendalir dalam paip secara berterusan

It is required that the flow rate be smoothly adjustable throughout the test range,
Ia dikehendaki bahawa kadar alir diselaraskan dengan lancar sepanjang julat ujian,

Hand hydraulic pump manufactured by Finotek is available to offer various flow rate for different application requirements,
Tangan pam hidraulik yang dihasilkan oleh Finotek boleh didapati untuk menawarkan pelbagai kadar aliran untuk keperluan permohonan yang berbeza,

adopts to measure the liquid rate and total flow rate of low viscosity,
mengamalkan untuk mengukur kadar cecair dan jumlah kadar aliran kelikatan rendah,

temperature or the flow rate of the outlet water.
suhu atau kadar alir air keluar.

usually mounted on the back line of hydraulic circuit to strict the flow rate, keeps the stead flow
biasanya dipasang pada baris belakang litar hidraulik untuk ketat kadar aliran, menyimpan aliran menggantikan

Application of aluminum reducer 1 When there is a change in the flow rate of the fluid in the pipeline such as when the pipeline needs to increase the flow rate or reduce the flow rate and the flow rate requirement does not change much the aluminum….
Penggunaan aluminium mengurangkan r: 1. Apabila terdapat perubahan dalam aliran aliran bendalir dalam saluran paip, seperti apabila saluran paip perlu meningkatkan kadar aliran atau mengurangkan kadar aliran, dan keperluan kadar alir tidak banyak berubah, reduksi aluminium diperlukan. Untuk memenuhi permintaan.