Examples of using Sodium in English and their translations into Malayalam
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
the hidden sugars and sodium in bread might surprise you.
Ion exchange softening uses sodium to replace scaleforming ions such as calcium, magnesium, barium, strontium, iron, and aluminum to prevent damage to the membrane elements.
The sodium forms very soluble salts, which are readily rejected by the Reverse Osmosis System and do not readily form mineral scales on the membrane surface.
Industrially, sodium acetate trihydrate is prepared by reacting acetic acid with sodium hydroxide using water as the solvent.
ATP provided by the inner segment powers the sodium-potassium pump. This pump is necessary to reset the initial state of the outer segment by taking the sodium ions that are entering the cell and pumping them back out.
keep cGMP-gated sodium channels open allowing a steady inward current, called the dark current. This dark current
It can be co-used with the Cloprostenol Sodium injection(PG) for the timed artificial insemination for dairy cattle(for the specified usage and dosage, please see the
The takeaway message is that if you don't want a lot of sodium and preservative as well as extra sugar in your ham,
A solution of sodium acetate(a basic salt of acetic acid) and acetic acid can act as a buffer to keep a relatively constant pH level. This is useful
like antimony potassium tartrate, potassium sodium tartrate.
Proxymetacaine is believed to act as an antagonist on voltage-gated sodium channels to affect the permeability of neuronal membranes;
conditions(such as postherpetic neuralgia) likely reflects their action on sodium channels that accumulate in injured nerve fibers.
low sodium, halal and just about anything else today's consumer demands.
The reaction of bromine with sodium hydroxide forms sodium hypobromite in situ, which transforms the primary amide into an intermediate isocyanate. The formation of an intermediate nitrene is
A systematic review studied the effectiveness of the anti-VEGF drugs ranibizumab and pagatanib sodium for patients suffering from non-ischemic CRVO.[5] Though there was a limited sample size,
the reaction would be conducted with sodium hydroxide or potassium hydroxide, giving the sodium or potassium carboxylate salt of the carboxylic-acid product.
Frank and Caro developed this reaction for a large-scale, continuous production process. The process was particularly challenging due to the equipment requirements required by the high temperatures during the initial igniter step. This process requires meticulous temperature control since the melting point of calcium cyanamide is only about 120°C lower than the boiling point of sodium chloride.
The reaction of aluminium sulfate and sodium bicarbonate forms carbon dioxide and aluminium hydroxide which stabilises the formation of a foam.[2]
Saline, also known as saline solution, is a mixture of sodium chloride in water and has a number of uses in medicine.[1] Applied to the affected area it is used to clean wounds,
positively charged ions(namely sodium ions) enter the photoreceptor, depolarizing it to about- 40 mV(resting potential in other nerve cells is usually- 65 mV). This depolarization current is often known as dark current.