Examples of using Relative density in English and their translations into Polish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Financial
-
Official/political
-
Programming
-
Computer
H2O, its relative density is 5.5g/cm3,
the grain distribution is more uniform, the relative density of the sintered compact.
inflammable, relative density 1.406, melting point 170-172℃, dissolving in water
Alternatively, dilute 780 ml of 98 to 100% m/m formic acid(relative density at 20 ºC:
Dilute 60 ml of concentrated ammonia solution(relative density 0,880 at 20 ºC) to one litre with distilled water.
700 ml of sulphuric acid(relative density at 20 ºC: 1,84)
The specific gravity SG(sometimes referred to as relative density D) is calculated by dividing the density of a sample sample by the density of pure water water at defined temperatures.
Restore powder is pressed to give 50% to 55% relative density of the green compacts, sintering at 1150℃ -1600℃.
Towler[5] through the use of sintered ZrO2 nano materials by the high relative density HAP-ZrO2 bioceramic composite materials,
high-speed suppression obtained at 950℃ relative density greater than 80.65% of W skeleton dense tungsten particles connection,
Experimental results show that the self-propagating Preheat explosive consolidation can successfully prepared molybdenum copper alloy gradient material, the relative density of compacts from pure Mo layer of 94.2% pure Cu layer transition to 98.4.
molybdenum powder mixing, molding, or isostatic then, and after pre-sintering and sintering temperature greater than 2000℃ can be made of the relative density of 90% of the molybdenum rhenium alloy.
increase the relative density of tungsten copper electronic packaging materials,
Currently, tungsten copper relative density of the material up to 99
the best sintered temperature is 1400â„fï1⁄4ŒThe relative density of sintered parts reaches 99%
the system is more difficult to take the high relative density of copper tungsten alloy.
10 ml sulphuric acid relative density 1,84.
Previously obtained in this process after sintering of copper tungsten material density is low(relative density of less than 97%),
is dissolved out from a known dry mass of the mixture with concentrated sulphuric acid relative density 1,84 at 20 °C.
insoluble in acetic acid or ethanol, relative density.