Examples of using Potential difference in English and their translations into Romanian
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Programming
containing components operating at a potential difference of more than 5 kV;
If the potential difference is accurately measured and the ambient temperature of the non-heated part is measured,
If I apply a potential difference over a conductor, then I'm going to create an electric field in that conductor.
plate to the other, gives me the potential difference.
When the potential difference between the components is large,
it says you cannot exceed the potential difference, not more than forty volts.
Capacitance is defined as the ratio of the electric charge on each conductor to the potential difference between them.
Where C is the capacitance, V is the electric potential difference, and Q the charge stored in the capacitor.
which are devices which maintain a constant potential difference.
he's applying a magnetic field perpendicular to the electrical current in order to uncover the potential difference on opposite sides of the conductor.
the paramecium maintains a potential difference across its cell membrane.
The measure with a voltmeter is done by plugging it in parallel on the section of track which we desire to know the potential difference.
electric potential difference, and electromotive force.
Mode of accelerating particles A potential difference between the anode and cathode.
this be minus, and the potential difference is.
The forward voltage from the galvanic isolator is higher than the potential difference between metals.
That it would take a half hour for these electrons to go along the wire if you apply potential difference of ten volts, copper ten meters long.
At low potential differences- up to 4.9 volts- the current through the tube increased steadily with increasing potential difference.
And the potential difference between the plates is the integral of E dot D L,
And remember that the potential difference over the capac- over the plates,