Examples of using RF interference in English and their translations into Spanish
{-}
-
Colloquial
-
Official
The solution had to work in NLOS and high RF interference conditions.
No IR, No UV radiation, No RF interference.
Pilot tone squelch for eliminating RF interference when transmitter is off.
Inaccurate maximum speed reading Unknown atmospheric or RF interference.
no-load, on/off muting, RF Interference.
In addition, the mains will also act as a carrier for many forms of RF interference generated by electric motors, air-conditioning units, thyristor light dimmers etc.
may cause complete failure see RF interference.
There may be RF interference when other appliances(such as WiFi base stations,
Remove any sources that may cause RF interference such as cell phones, cordless phones, lighting equipment,
Remove any sources that may cause RF interference, such as cell phones, cordless phones, lighting equipment, computers.
An Ethernet cable with a ferrite core provided with the USB device server must be used for RF interference suppression.
That the transfer to the graveyard orbit removal should be carried out with particular caution in order to avoid RF interference with active satellites.
Electrical Fast Transient and Conducted RF interference may cause the unit malfunctioning.
Protective circuits: Protection against RF interference, output current limitation(limiter),
Avoid mounting the RPT1 on metal, or in any location that could cause RF interference.
the Receiver unit should be placed in a location where there is little or no RF interference.
Do not operate the Marantz touch screen remote control while positioning the Receiver unit, since both RF interference and operation of the Marantz touch screen remote control will cause the LED of the Receiver unit to blink.
The all-metal die-cast body shields the microphone very effectively against RF interference when using it near radio transmitters
The amount of RF interference present is indicated by the rate at which the LED blinks and the brightness of the LED when blinking a higher rate of blinking and a brighter light means more RF interference.
That could cause localized rf interference. Whoa.