Examples of using Base grille in English and their translations into Spanish
{-}
-
Colloquial
-
Official
For models with a base grille, reach the condenser by inserting a brush
For models without a base grille, reach the condenser by inserting a brush
For models with a base grille, the grille must be removed in order to clean the condenser.
Before removing doors, open both doors and remove base grille see the"Base Grille" section.
To remove the base grille, open the doors
Remove the base grille; then remove the drain plug
place the base grille into position.
Measure the distance between the bottom of the base grille and the floor.
insert the cap into the base grille until it stops.
If your model has a base grille filter system, make sure the base grille filter is properly installed.
a hose adapter and a drain hose behind the base grille which carry the defrost water out from the freezer.
To replace the base grille, align prongs on back of grille with slots in cabinet and push forward until the grille snaps into place.
To replace the base grille, align prongs on back of grille with clamps in cabinet and push forward until grille snaps into place.
To replace the base grille, line up the clips on the back of the grille with the openings in the baseplate and push the grille
To replace the base grille, line up the clips on the back of the grille with the openings in the baseplate and push the grille
If your model has a base grille water filter, make sure the water filter is properly installed
It is recommended that you replace the base grille water filter cartridge when the water filter indicator light changes to 0%
opening the door and pressing the exterior switch located beside the temperature control knob on the base grille.
If your model has a base grille filter system, make sure the base grille filter is properly installed
keep the light on at all times by pressing the left side of the switch, located next to the temperature control, on the base grille.