Examples of using Control parameters in English and their translations into Spanish
{-}
-
Official
-
Colloquial
Control parameters are: Reaction pressure/ temperature,
By foot, DJs can control parameters such as filter cutoff frequency,
DRP enables the user to set certain inventory control parameters(like a safety stock) and calculate the time-phased inventory requirements.
access to all important control parameters, additional settings for band limit, limits, Co-Speedfactor etc.
As soon as a co-speed factor is set, it is considered in calculating the control parameters.
Learn various commands that will adjust your controls and understand the difference between control parameters.
The UTILITIES key selects the Utilities menu which gives access to the stored set-ups and remote control parameters.
configure jobs and control parameters, edit projection data
Drive control parameters After the fieldbus communication has been set up, the drive control parameters listed in the table below should be checked and adjusted where necessary.
To be able to configure the torque control parameters for optimal performance,
what happens is that the risk control parameters must be different.
from both bottom-up and top-down analysis while complying with risk control parameters as delineated in the Investment Manual;
MODULE have been set, the drive control parameters(shown in section Drive control parameters on page 269)
Drive control parameters After the modbus communication has been set up, the drive control parameters listed in the table below should be checked
where the real-time simulation results are used to predict the changes that would occur for a control input change, and the control parameters are optimised based on the results.
using this response to determine the control parameters.
opening enclosures and control parameters within the rooms.
For example, production line operators control parameters such as line speed
Edit screen control parameters, Work in the Assignments and Mappings tab,
Edit screen control parameters, Assign hardware controls to screen controls,