Examples of using Corresponding LED in English and their translations into Spanish
{-}
-
Colloquial
-
Official
to the RW205, the corresponding LED indicator lights should remain lit.
As connections are established with the 24-Port 10/100Mbps Switch, the corresponding LED lights will turn on.
If the receiver is in a laser beam, a corresponding LED grade display lights.
to activate an LED, the robot drawing changes to the corresponding LED image.
If you are attempting to connect a device and its corresponding LED does not fl ash after 5 seconds of holding down the connect button,
they cannot be selected; the corresponding LED will not light up.
Fig. 1b), and the corresponding LED(reference B,
When the ICE PARTY function has finished, press the ICE PARTY button to stop the corresponding LED from flashing and to silence the sound alert.
the activation of this button lock is confirmed by a short beep and the illumination of the corresponding LED on the keypad. To deactivate the function, press and hold the Child Lock button for 2 sI-CAREnds; deactivation will be confirmed by a short beep and by the corresponding LED switching off.
As long as the timer is running, the corresponding led will flash.
Corresponding led will light on when you press"+" or-".
The corresponding lED indicator illuminates when the EQ is activated.
Corresponding led will light on when you press"+" or-". Parameters.
The corresponding lED will illuminate when the Master Phantom Power is activated.
The corresponding Led above the channel will light,
Connect the red and black leads from the cooktop conduit to the corresponding leads in the junction box.
The corresponding LED, will also illuminate.
Also check that the corresponding LED is lighted.
Easy conversion to corresponding LED tubes by replacement.
The corresponding LED starts blinking to display this function.