Examples of using External diameter in English and their translations into Spanish
{-}
-
Colloquial
-
Official
These washers should be inserted in such a way that sections among them do not exceed three times the external diameter of the disc springs conforming the group.
External diameter of the wind towers plate roll is between 2.000 mm
The same rule applies with respect to the external diameter of stacks with external guides.
The external diameter should be no more than 15 mm
whereby the hose must not flatten by more than 10% of the original external diameter.
Their external diameter varies between 2.3 m
has the same external diameter as the common and well-known RG58.
The internal diameter of the connection pipe must correspond to the external diameter of the appliance flue gas exhaust stub pipe DIN 1298.
has the same external diameter as the common and well-known RG58.
The dimensional properties of a high collapse pipe depend on three factors: external diameter to wall thickness ratio,
The standard C Track curve has the customary radius of 360 mm/ 14-3/16“ and an external diameter of 76 cm/ 30“.
An additional advantage is that operational costs are reduced given the incensement of the production flow area produced by the smaller external diameter of the coupling.
In case of insufficient movement of the machine across the centre line the external diameter can not be machined with the same tool.
Replacing the depressed center wheel Replace the depressed center wheel when it has been worn out to about 2-3/8"(60mm) in external diameter.
Use a hard vinyl chloride pipe VP-25(with an external diameter of 32 mm)
The photo shows the roller with arms for the stone burier It is available in one external diameter.
The photo illustrates the roller with arms for stone burriers It is available in only one external diameter.
electrically insulating membrane that was pierced by a single boron nitride nanotube with an external diameter of a few dozen nanometers.
having circular cross-sections, the external diameter of which exceeds 406,4|mm,
In the manufacturers' catalogue, they are usually identified by the series and external diameter p.e.