Examples of using Hex head in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Hex head setscrews clamp the block securely to the barrel.
Remove the(4) hex head bolts the join the motor and motor adapter.
Remove the 10 hex head screws from the door and remove the door.
Insert M8 hex head bolts through washers and the.
Transfer two hex head screws from top corner of cabinet to holes left.
Remove two hex head screws.
Hex Head Hinge Screws D.
For screwing, unscrewing screws with internal hex head.
It is used to tighten and/or loosen hex head screws or bolts.
Flat edges at hex opening for full contact with flanged hex head screws.
Secure the motor with the(4) hex head bolts.
Remove the left rear wall by opening the 3 top hex head bolts.
A set of hex head(allen) wrenches.
Remove the center hinge pin with a 5/16″ hex head driver.
X80mm lag screw DIN 571 zinc plated hex head(box 50 units) GFD DIN 571- Box 50 units.
X16mm hex head screw DIN 933 zinc plated screw 6.8 Total(box 500 units)
Foot 4x locking flange nut 2x rubber bumper 2x axle pin 2x wheel 2x flat washer 2x cotter pin 2x hex head bolt 2x flat washer.
X16mm hex head screw DIN 933 zinc plated screw 6.8 Total(box 500 units) GFD.
Remove the 2 hex head bolts( 7)
ribs or hex head prevents the fastener from rotating in the host material once it has been properly inserted.