Examples of using Routing protocol in English and their translations into Spanish
{-}
-
Colloquial
-
Official
A route dynamically learned through the EIGRP routing protocol.
R1 and R2 must use a dynamic routing protocol.
Provide hardware for the routing protocol testing.
Upon initial startup of router or routing protocol.
Readers will learn about the routing protocol daemons for EdgeOS.
Netsh routing ip nat install: Installs the routing protocol corresponding to the current context.
Which routing protocol maintains a topology table separate from the routing table?
If you still see the routing protocol traffic, please perform the following tasks.
The routing protocol has been updated from RIP to OSPF,
The Cache Array Routing Protocol(CARP) is used in load-balancing HTTP requests across multiple proxy cache servers.
Redistribution can also take place among different processes of the same routing protocol.
RSVP is not a routing protocol and was designed to interoperate with current
S defines a default mandatory routing protocol(Hybrid Wireless Mesh Protocol,
The maximum-paths command determines the maximum number of routes that the routing protocol can use.
RSVP is not a routing protocol but works with current and future routing protocols. .
RPL it is a routing protocol for wireless networks with low power consumption
Configure the PE device with the same routing protocol that the CE device uses.
apart from enabling internal or external routing protocol configuration.
Hosts that use static routing do not run a dynamic routing protocol such as RIP.
since it is designed to be run together with a routing protocol such as Babel or OLSR.