Examples of using Select switch in English and their translations into Spanish
{-}
-
Colloquial
-
Official
T31 deck Select Switch Via this switch it is possible to select the ontrolable decks.
Input Select Switch: Use these switches to select which set of rear panel inputs you want to use for that particular channel.
If the camera is in Video mode, select Switch to image mode from the active toolbar.
Verify that the voltage select switch is set to 115 on the new power supply.
The channel select switch(D3) is at the back of the thermo sensor.
turn both the master switch and the mode select switch ON to enable the fan to run at the certified airflow rate.
Ensure that the voltage select switch is in the correct position for the type of voltage you use 115 VAC
in the active toolbar, select Switch to sequence mode.
Position the speed select switch upward(300rpm) for spray buffing Figure 3.
Use the Focus Select switch to assign a function of your choice,
Fan will run at the user-adjustable airflow rate if the mode select switch is OFF.
To downgrade to the Free subscription, select Switch to the Free subscription upon renewal.
Position the speed select switch downward(185rpm) for scrubbing, stripping and carpet cleaning.
You can switch between digital RGB signals and analog RGB signals with the digital/analog select switch qh.
When recording via the internal microphone, set the mic type select switch to DYN.
Note: These connectors are set at a constant"line level" are not effected by the Mic/Line"gain" select switch.
The 10/0(ALL) key can be used as“10” key only when the select switch is set to VIDEO MEMORY.
Be sure to check the local voltage levels and the voltage select switch before use.
The zone select switch also allows the FlexTT5 to work with the same zones on a MultiMAX.
By pulling the DIRECTION select switch toward the front(REV position), tracks can be played in reverse.