Examples of using Side cover in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Remove the side cover(B) from the left side of the planer.
Remove side cover screws using 5/16" nut-driver.
Remove the side cover(18) by undoing the two.
Refasten the side cover(18) with the selftapping screws 16.
Install the side cover, then lightly tighten the side cover release knob.
Loosen the side cover release knob slightly, but do not remove the side cover. .
Reinstall the side cover and the screws.
Remove side cover screws using medium phillips screw driver.
Tighten the side cover knob securely.
Remove the side cover screws and handle assembly.
Insert the side cover hooks to the chassis top and bottom holes.
Pull the side cover toward the rear panel until its hooks disengage.
Disconnect wires from circuit board and remove side cover.
upper shell, and side cover.
Open the looper cover and side cover. 3.
Tighten the side cover release knob.
To reinstall the front panel assembly and side cover.
Take a wooden board that will be used for the side cover of the box, measure the length of the axis
Next, position the side cover(38) so that it faces the bottom triangle on the main body
Install the side cover, making sure the chain catcher is properly seated in its hole, then lightly tighten the side cover release knob Fig 36.
