Examples of using Working load in English and their translations into Thai
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Staggered blades can decentralize working load when granulating to increase cutting efficiency.
Minimum Ultimate load is 6times working load limit;
Maximum proof load is 2.2 times working load limit;
Individually proof test at 2 times Working Load Limit.
In determining the working load of a cable or wire rope, the direct stress plus the shock.
A proof test is usually expressed as a percentage of the working load limit(WLL) that equipment is designed to withstand.
Maximum working load limit that shall be applied in direct tension to a new and undamaged wire rope.
Our utility rope has a better safe working load of 125 lbs which is the best quality among these lines.
The back of container ramp is strengthened by steel to make sure the safety when it be used under rated working load.
The body is made of high strength hot forged steel or Aluminum, in order to minimize the ratio between weight and working load.
The back of container ramp is strengthened by steel to make sure the safety when it be used under rated working load.
The horizontal lifting clamp test load is 2 times of the maximum working load. When using horizontal lifting clamp, overloading is strictly prohibited.
Minimum effort to rise maximum load: very low headroom, proof tested to 1.5 times of working load.
Rich experience in whole producing line layout and working flow arrangement, reduce your working load and highten automatic degree.
The system can make the working load at a reasonable level, which can make the milling tool work for a long time and protect the tool.
Tested under 1.5 times the working load limit. Breaking load is 4 times the working load limit.
Specifications Forklift Fork-Wheel Fork- Safe Working Load: 3000kg- Tine Length: 1200 mm- Weight per Pair: 2X135 kg WF series forklift slip-sheets wheel roller forks Perfect for container loading, Roller Forks allow for products such as bulk bags,….
The swing type balance beam suspension structure with splayed beam is connected with the frame and traveling system to transmit the working load and impact load to the main frame during working, which effectively improves the stability of small-sized bulldozers under complicated working conditions.
To a single test for the rated load, lifting operations in a single or two groups of use, lifting the factory may not be hit by hanging objects, the test load of 2 times the maximum working load, is strictly prohibited overload.
Our company has researched plenty of varieties of helical tension grips and we are able to match our wire formed dead ends to your ADSS cable size, according to its working load and outer diameter.