Examples of using A sheet in English and their translations into Urdu
{-}
-
Ecclesiastic
-
Colloquial
-
Computer
Step 1: Pick up a sheet of construction paper and cut a rectangle measuring 14.8 x 21 cm(length x width). Previously,
Step 1: Pick up a sheet of square paper and fold the upper-left corner of the paper to the lower-right corner of the paper. Make a fold and then unfold the paper.
Step 1: To begin, glue the two sheets of paper together on one of the short sides with tape. The origami ball consists in its width of two leaves- a sheet would be too short to close the lampshade completely.
The simple origami cube requires only a sheet of square paper. If no origami paper is currently available, you can also use a sticky note or a square cut sheet of writing paper.
Step 1: Take a sheet of A4-sized construction paper and a sheet of paperboard. Cut the sheet of cardboard so that it is a few centimeters smaller than the paper. How big you
Step 1: Place a sheet of origami paper on the table in front of you- if the paper is printed in different colors, the side that should later be outside should point downwards. Fold one diagonal, one tip at a time, so to speak.
I add a sheet of nori every second day, every 3rd day it's a treat of 10
But you can also paint our template, put a colorful sticker on it or use a stencil to make a sheet from an old magazine or book(please think well before that!!!).
Step 1: First, grab a sheet of A4 paper and divide it into two parts. You can use the scissors or fold the sheet several times from one side to the other and then tear the two sheets apart.
Whether from several elements or from a sheet of paper- Origami makes it possible. These paper boxes should be tinkered once.
Most candidates are able to assess the paper in five minutes and use the remaining 10 minutes to write notes on a sheet of paper provided to help with calculation.
Vacuum forming is a simplified version of thermoforming, whereby a sheet of plastic is heated to a forming temperature, stretched onto a single-surface mold, and forced against the mold by a vacuum is formed into permanent objects such as turnpike signs
Manual plastic vacuum forming machine information Vacuum forming is a simplified version of thermoforming whereby a sheet of plastic is heated to a forming temperature stretched onto a single surface mold and forced against the mold by a vacuum is….
If you want, you can record the side parts of the bag on a sheet of paper or cardboard as in the drawing beforehand, cut it out and use it as a template. I draw the parts directly on the fabric or oilcloth.
The size of the bag of course depends on the size of the paper. With a sheet in A4 format, you can make a bag that can later store a gift with the maximum size of 10 cm x 15 cm. With a sheet in A3 format, the bag is already much larger. Here are the instructions: Instructions for paper bags.
A sheet of origami paper.
Contained in a sheet.
Fold a sheet of white A4 paper in half.
It's almost like a sheet of paper.
When they came in they said i was as white as a sheet.