Examples of using Operating pressure in English and their translations into Vietnamese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
aluminium, they can withstand high operating pressure levels, at the same time helping to limit weight and consumption.
Most importantly, what are the maximum and minimum flows you need to measure, the maximum operating pressure and the ambient and system temperature range?
Maximum operating pressure rating of 250 psi at 70 degrees F ambient temperature.
Pumps are generally rated by their maximum operating pressure capability and their output, in gpm or lpm,
Conditional operating pressure in the boiler(relief valve adjustment)- 0,15 MPa(1,5 kgf/ cm²).
The maximum operating pressure of the pump is 40MPa, over voltage
When operating pressure is reached, open the press drain valve in the return line and drain the condensate
The operating pressure is about 2/3 of the operating pressure of the conventional low pressure composite film, and the desalination rate
The thermic fluid boiler can be operated at a lower operating pressure while achieving a higher operating temperature.
One pressure rating corresponds to a certain spring for a maximum operating pressure that can be set by means of that spring.
Experimental test pressure valves and valve have a maximum operating pressure at each temperature levels.
There are two things you must absolutely know in order to select the right pump: the irrigation system operating pressure and the system flow rate.
employed in the system, operating temperature and the system's operating pressure.
employed in the system, operating temperature and the system's operating pressure.
In general, the rated pressure value indicated on the hydraulic valve should be made to be greater than the operating pressure of the system.
Once the system reaches its operating pressure, the brakes are freed
According to different operating pressure, heating method and the moving type of the wet material,
Split outer casing halves of cast or ductile iron contain the wear liners and provide high operating pressure capabilities.
Intermittent pressure refers to the maximum allowable pressure inlet, continuous operating pressure refers to the working pressure difference.