Примеры использования Measuring points на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
The statistical mean of all captured measuring points is used for the calculation.
Note: Figure C shows the measuring points for right-hand traffic.
The selected geometry specifies the type of geometry that is determined from the captured measuring points.
Number of measuring points measuring points for calculating the feature/ acquired measuring points. .
you need to capture measuring points for the feature.
at least three measuring points are needed.
Automated switching between measuring points for up to 40 sites.
The client required quality planning in advance with precisely defined and numbered measuring points.
Many measuring points must be temperature controlled.
Automated switchover for up to five measuring points.
The measure distance control the distance between the measuring points height sensor on/off points. .
The measuring points are acquired between the contour and the edge of the circle,
The selected measuring points shall be a minimum of 132 mm apart horizontally, and a.
During a measurement, you can filter out measuring points that are outside the defined criteria.
Setting automatic measuring point acquisition You can acquire measuring points automatically or manually one at a time.
The number of measuring points that need to be captured for a feature depends on the configuration of the selected geometry.
When measuring points are acquired with an OED sensor,
The iron concentration at all measuring points exceeds the MAC values(both aquatic life
Depending on the number of measuring points captured, a fitting algorithm is used to calculate the appropriate substitute feature
The illumination shall then be measured at the measuring points specified in paragraph 7 of this Regulation.