Примеры использования The filter element на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
Note: To ensure optimum dust extraction, empty the dust box 7 in good time and clean the filter element 6 at regular intervals.
For this reason, the filter element should be dried or replaced by a dry filter
The filter element is constructed and the pleats are supported in such a way that it can withstand differential pressures from 10-180 bar(1-18 MPa), tested to DIN ISO 2941.
If the machine is exclusively used for wetvacuuming, the filter element should be replaced by a special insert special accessory.
it completely eliminates the need for frequent access to the service for cleaning the filter element and replace it.
Replace the filter element as described in chapter Replacing the filter element[>
it will adhere to the surface of the filter element.
After flushing the filter element must always be replaced see chapter Replacing the filter element> page 12.
When installing the aggregate, be sure to maintain the required removal height for removing the filter element.
(1) The filter element is often clogged, and it is necessary to clean or even change the filter element.
Under this impact, if the filter element has accumulated pollutants
A strong synthetic mesh or stainless steel mesh is used as the filter element.
it can rotate out of the filter element.
air-conducting fiber reinforced hose, 10 m, the filter element to clean the air inhaled from dust,
The filter elements are replaceable and available in two
The filter elements can be individually
The filter elements allow for filtration suitable for purity class.
The filter elements can be individually and quickly exchanged.