断面積 - 英語 への翻訳

cross-section
断面
横断面
cross-sectional area
断面積
横断面区域
sectional area
部門 別 区域
断面 積
面 区域
section area
断面 積
cross-section surface area
cross-sections
断面
横断面
cross sectional area
断面積
横断面区域

日本語 での 断面積 の使用例とその 英語 への翻訳

{-}
  • Colloquial category close
  • Ecclesiastic category close
  • Computer category close
  • Programming category close
X(公称断面積mm2)X9。
X(nominal cross sectional area mm2) X 9.8[N].
をクリックして[断面積/直径]ダイアログを起動し、リストから断面積/直径を選択します。
Click[…] to launch the Cross-sections/ diameters dialog and select a cross-section/ diameter from the list.
例えば、応力は荷重を試験片の断面積で割ることにより導かれる。
For example, Stress is derived from Load divided by the specimen cross-sectional area.
ルーティングパスネットワークとそれらのルーティングパスの断面積を定義していること。
You have defined a routing path network and the cross-sections of the routing paths.
ケース2プロジェクト全体で使用する値を設定の[断面積/直径]テーブルに追加します。
Possibility 2 Add the value that you want to use project-wide to the Cross-sections/ diameters table of settings.
P005043:プロジェクト設定の'断面積/直径'に断面積/直径が含まれていません。
P005043: The cross-section/ diameter is not contained in the project settings under'Cross-sections/ Diameters'!
故に、断面積の大きな工具と同じ様に力まかせで使用すると、破損に至ります。
Therefore, brute force as for another tool in a bigger size of the cross-section will lead to damages of a product.
そうでない場合、[断面積]ルーティングパスプロパティに既定値を入力する必要があります。
If not, then you must enter a default value in the Cross-section routing path property.
開いた[断面積/直径]ダイアログで事前に定義されている値のいずれかを選択し、[OK]をクリックします。
Select one of the predefined values from the Cross-sections/ diameters dialog that opens and click OK.
また、これにはデバイス(ターゲットのDT)もリストされ、断面積や対応する接続の長さに関する情報も記載されます。
It also lists the devices(DT of the target) and gives information about cross-section and/ or length of the corresponding connection.
KomaxWireKey:断面積とワイヤの色の識別子(ワイヤキー。例:
Komax WireKey: Wire key; identifier for cross-section and color of wire, e.g.,
(注1)コア密度:ケーブル断面積に対する光ファイバ本数。
(note 1)Core density: The number of optical fibers versus the cross-section area of the cable.
情報/著作権理由プロジェクト設定に準拠しない断面積/直径を使用しています。
Info/ Copyright Cause You are using a cross-section/ diameter that does not conform to the project settings.
N51ネオジムをドープしたリン酸塩ガラスは、高エネルギー貯蔵、大きな誘導放出断面積、長い蛍光寿命、大きなサイズの容易な調製および良好な光学均一性の特徴を有する。
N51 Neodymium-doped phosphate glass has the characteristics of high energy storage, large stimulated emission cross-section, long fluorescence lifetime, and easy preparation of large size and good optical uniformity.
断面積/直径:単位:接続の断面積/直径は部品管理から採用され、デバイス選択時のフィルター条件として使用されます。
Cross-section/ diameter: Unit: The connection cross-section or diameter is adopted from the parts management and can be used as filter criteria when selecting devices.
血液量は、人体組織100gの断面積当たりの血液量のことであり、血液量と血流速度との積がほぼ血流量となる関係にある。
Blood volume" refers to blood volume per cross-sectional area of 100 g of human body tissue, and the product of the blood volume and the blood velocity becomes nearly equal to the blood flow.
ダイ全体の断面積を押出成形品の断面積で除算した押出比も、押出し、冷間または高温、高圧または低圧の最良の方法を決定する際に重要である。
The extrusion ratio, the division of the cross-sectional area of the entire die by the cross-sectional area of the extruded product is also crucial in determining the best method of extrusion, cold or hot, high pressure or low pressure.、.
接続色/番号接続:単位付きの断面積/直径部品番号[1]:接続に入力された最初の部品の部品番号が表示されます。
Connection color/ number Connection: Cross-section/ diameter with unit Part number[1]: Shows the part number of the first part entered at the connection.
パイプによって連結された二つのピストンの間では、加えられた圧力と伝達される圧力とはそれぞれのピストンの断面積に比例し、ピストンの移動距離は各々の断面積に反比例します。
Between two pistons connected through their pipe arrangement, applied pressure and transmitted pressure are in proportion to each sectional area of the piston and the moving distance of the pistons is in inverse proportion.
下図に示すようなランナーがある。各ゲートの断面積SG1、SG2、SG3、SG4、SG5を算出する。
Assuming you are using the runner illustrated below, calculate the cross-section surface area for each gate- SG1, SG2, SG3, SG4 and SG5.
結果: 128, 時間: 0.0483

単語ごとの翻訳

トップ辞書のクエリ

日本語 - 英語