英語 での The cross-section の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
It was possible to cut by the end milling process, however, the quality of the cross-section did not meet the evaluation criteria.
Picture a: The cross-section of GaN layer grown over high-temperature SiN intermediate layer and its TEM image.
When he happened to come across the pruned red plums, he noticed that the cross-section of the freshly cut branches was a bright reddish color.
If you have decided on energy consumers, we can calculate the cross-section.
Although the uncured ceramic was a special work-piece, the quality of the cross-section was improved by the….
An iron core remains in the hollow portion, the end of which appears inside the lotus core the cross-section is square.
specify the cross-section of the sleeve here.
Winged bean is about 20 cm/ 7.8 in long, and shape of the cross-section reminds of lovely stars.
To cross-section: The To cross-section column allows you to specify the cross-section up to which the instructions entered in the Machine command field are applied.
Seconds, the cross-section, widening from the back to a ridge on both sides, then narrowing to a very acute angle at the edge, combines the virtues of thickness for strength and thinness for cutting power.
The cross-section of P-TiO2 was prepared by the CP method and then analyzed by SEM/EDS. The results showed that the TiO2 was uniformly dispersed from the upper to lower layers of the cosmetic film.
Easy edition of installation views, including: installation insulation, dividing pipelines and ducts into segments, changing the cross-section of pipes and ducts, changing the dimension of fittings etc.
Certain properties(e.g. the Cross-section/ diameter) will then exist twice: once directly from the definition point and once indirectly from the connection.
The cross-section polygon of the tube measured at the middle of the path segments is always equal to the base polygon(u1, w1,…, un, wn).
In the case of automatic routing paths(wire ducts), the cross-section available to the routed connections is calculated from the dimensions of the wire ducts involved.