英語 での Harmonic distortion の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
Advanced control with Adaptive Feed Forward Cancellation(AFC) technology for very low harmonic distortion.
Harmonic distortion"colors" sound with additional levels of tones above and below the pure original note.
High input power factor level, harmonic distortion cancellation: save cost of energy consumption, reduce power pollution.
In the audio frequency range, the total harmonic distortion is less than 0.0007.
Anti-resonance harmonic filters are designed to prevent resonance conditions and reduce harmonic distortion and power losses in the PFC system.
The design reduces cam disc eccentricity and harmonic distortion, and ensures maximum level stability.
Advance electromagnetic design for high power density, optimized torque, low noise, minimal cogging and harmonic distortion.
Drive systems also provide EMC filtering, providing lower input current harmonic distortion than is possible through traditional rectifiers.
The Tracing Model section adds even harmonic distortion to the input signal.
Being based on the so called cascading converter technology, the Merus Audio solution allows to reduce the total harmonic distortion and noise.
Low ON-state resistance, excellent channel-to-channel ON-state resistance matching, and minimal total harmonic distortion(THD) performance are ideal for audio applications.
Typically, for best performance, total harmonic distortion(THD) of~100 dB is required at 16 bits and~110 dB for 18-bit ADCs at the input frequency of interest.
The high bandwidth and low total harmonic distortion(THD) ensure optimal performance for ac signals, making it suitable for filter design.
The MAX4295 features a total harmonic distortion plus noise(THD+N) of 0.4%(fOSC 125kHz), low quiescent current of 2.8mA, high efficiency, and clickless power-up and shutdown.
P standard jack Frequency response 25Hz-40kHz(+/-6dB) Distortion ratio THD+N: Less than 0.01%(except loudspeaker)<< THD(total harmonic distortion) does not reflect sound quality so much.
Component Selection Challenges for Low Distortion and Noise For low harmonic distortion and low noise applications, users have to select qualified components in the signal chain design.
In C3EQ, it is configured with only two amplification tubes C3g of high linearity, suppressing harmonic distortion and intermodulation distortion to a minimum while returning non-return.
Both devices deliver 1.4W continuous power into a 4Ω load with less than 1% Total Harmonic Distortion(THD) while operating from a single +5V supply.
Then, by using the total and fundamental rms values, we compute the total harmonic distortion plus noise(THD+N) based on the standard definition.
One of their main benefits is that the loop gain of an ideal CFA is independent of its closed-loop gain, thus allowing the CFA to deliver excellent harmonic distortion and bandwidth performance irrespective of its closed-loop gain.