英語 での Lead wire の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
Lead wire is automatic cut and end-stripped, crimping.
The modulated high frequency is supplied to the antenna of the lead wire of 1-2m and radiated as an electric wave in the air.
The lead wire, which is plated with solder, shall be mounted to the caps by welding process.
The robustness depends on current durability of the connecting portion between the lead wire terminal and the electrode foil of the capacitor.
The lead wire, fiber glass sleeve, insulate film and shells can customized according to per customers requirements.
Features Complies with AEC-Q200*1 and therefore the lead wire type capacitor can be connected by welding or"crimping*2" close to a noise generating source.
A platinum resistant element is enclosed by brass case, and alumina porcelain is used for lead wire fixtures to provide heat-resistant structure.
Housings accept both lead wire and AMPLIVAR direct connect pin receptacle terminals.
If the lead wire side where R173 is long is used for the point that 12V is impressed when transmitting, it is possible to remodel it easily.
Power lead wire Silicone rubber, SJ Power Cord, or Teflon insulated stranded wire. .
Ecg cable Great variety: Medical cable, electrode wire, TENS lead wire, Pin lead wire, Snap lead wire, snap adaptor, snap converter& etc.3.
Ambient temperature is up to 400℃ for the Lead wire insulation material;
Ecg cable Great variety: Medicalcable, electrode wire, TENS lead wire, Pin lead wire, Snap lead wire, snapadaptor, snap converter&etc.
Finsish type: the heating element only or the assembly of heating element, plastic rack, lead wire, temperature controller and fuse protector.
Medical cable, electrode wire, TENS lead wire, Pin lead wire, Snap lead wire, snap adaptor, snap conv.
Torsion strength: To bend the lead wire at the point of about 6mm~.
At this time, the lead wire of 1.5m(It was 50MHz and λ/4) was brought so that be so.
The lead wire is provided to you with OEM service, which is high temperature resistant, easy installation.
To compensate for this unwanted voltage, current source 2 is used to create a voltage drop in the middle lead wire.