WORKING LENGTH - 日本語 への翻訳

['w3ːkiŋ leŋθ]
['w3ːkiŋ leŋθ]
作業長
働き長さ
作業長さを
working長

英語 での Working length の使用例とその 日本語 への翻訳

{-}
  • Colloquial category close
  • Ecclesiastic category close
  • Computer category close
  • Programming category close
If it reaches working length, the canal is considered large= R50.
作業長に達すると、運河は大きいと見なされます=R50。
Preparation the root canal to the working length with 20, 25, alternately flushing with NaOCl and EDTA.
で根管を作業長に準備し、NaOClとEDTAで交互に洗い流します。
Recipro engine use After reaching working length with R25, use R40 or R50 for an increased apical enlargement, as necessary.
レシプロエンジンの使用R25で作業長に達した後、必要に応じてR40またはR50を使用して先端の拡大を増やします。
Use the V2, with a brushing action, until working length is reached.
作業長に達するまで、ブラッシング動作でV2を使用します。
Use the V1, as described, until working length is reached.
作業長に達するまで、前述のようにV1を使用します。
Remove and shape with system files E1& E2 to the working length.
システムファイルE1&で削除および整形E2を作業長にします。
Carry the PRIMARY file to the full working length in one or more passes.
つまたは複数のパスでPRIMARYファイルを完全な作業長にキャリーします。
Hand pre-expansion: Using hand K file 8, 10, 15, 20 to the working length.
ハンドの事前拡張:ハンドKファイル8、10、15、20を使用して作業長にします。
Using T1 to the working length, which could make a smooth connect between the 1/3 canal tip and middle 1/3 canal.
滑らかの1/3運河の先端と中間1/3運河の間で接続させることができる働き長さへのT1を使用して、。
Thanks to the telescoping design, working length adjustment can be carried out within seconds.
働き長さの調節、はめ込み設計へのありがとうは秒の内に遂行することができます。
Machine Body Fin CNC, China, 6 meters effective working length, welded by 16-20MM steel plate, heat treatment of whole structure after welding.
機体フィンCNC、中国、6-20メートルの有効作動長、16-20MM鋼板による溶接、溶接後の構造全体の熱処理。
Measure working length with an apex locator and enlarge up to a size 15 hand file.
頂点ロケーターで作業長を測定し、サイズ15のハンドファイルまで拡大します。
Move appropriate finishing files to toward the canal to the working length, and then move them back at once.
適切な仕上げファイルをに移動します運河に向かって作業長さまで移動し、それらを一度に戻します。
Penetrattion to the exact working length is not systematically sought, except if the root canal easily receives the .06 EX Files.
EXファイルを簡単に受け取る場合を除き、正確な作業長への浸透は体系的には求められません。
After reaching working length with R25, use R40 or R50 for an increased apical enlargement, as necessary.
R25でワーキングレングスに達した後、必要に応じてR40またはR50を使用して先端の拡大を増やします。
Establish working length, confirm patency and verify the glide path.
作業長を確立し、開通性を確認し、グライドパスを確認します。
Establish working length, confirm patency and verify the presence of a smooth reproducible glide path in the apical 1/3.
作業長を確立し、開通性を確認し、先端1/3に滑らかで再現可能なグライドパスが存在することを確認します。
Before starting the canal shaping with NiTi Rotary Shaping Files, confirm your working length with a 15 K file combined with an Apex Locator.
NiTiロータリーシェーピングファイルで運河のシェーピングを開始する前に、Apexロケーターと組み合わせた15Kファイルで作業長を確認します。
Repeatly follow and brush, it will be continued until the exact working length;
繰り返しフォローしてブラッシングすると、正確な作業長になるまで続けられます。
The high performance cannulas 6 of the invention should be made with additional working length at both ends of the final cannula 6 dimensions.
本発明の高性能カニューレ6は、最終カニューレ6の寸法の両端で、追加作業長で製造すべきである。
結果: 80, 時間: 0.0335

単語ごとの翻訳

トップ辞書のクエリ

英語 - 日本語