THE SYSTEM CLOCK - 翻译成中文

• 系统时钟

在 英语 中使用 The system clock 的示例及其翻译为 中文

Timer 1 uses the system clock.
定时器1使用系统时钟。

The system clock is correct.
们的系统时钟配置是否正确。

Selects source for the system clock.
选择系统时钟源：.

The system clock is used undivided.
系统时钟不分频使用。

Solution 3: Check the system clock settings.
解决方案3：检查系统时钟设置。

Counter/Timer 0 uses the system clock.
计数器/定时器0使用系统时钟。

Returns the current date from the system clock.
Date返回系统时钟的当前日期。

Counter/Timer 3 uses the system clock.
计数器/定时器0使用系统时钟。

A 16 MHz on-chip oscillator generates the system clock.
一个16MHz片内振荡器产生系统时钟。

Must be less than 1/10 the system clock frequency.
不得超过系统时钟频率的1/2。

The third source is the system clock divided by 256.
第三个时钟源是系统时钟的256分频。

Timer 2 clock is the system clock divided by 12.
定时器2时钟为系统时钟/12。

The clock can be external clock or the system clock.
时钟既可以是外接的时钟，也可以是自己的内部时钟。

The accuracy is limited by the accuracy of the system clock.
此常量的准确性受系统时钟准确性的限制。

All timers depend on the system clock of your Arduino system..
所有定时器都取决于Arduino系统的系统时钟。

The accuracy is limited by the accuracy of the system clock.
其准确性受系统时钟准确性的限制。

Number of interrupts per second, including the system clock.
In每秒中断数，包括时钟中断。

Number of interrupts per second, including the system clock.
每秒的中断数，包括时钟中断.

Number of interrupts per second, including the system clock.
In每秒的中断数，包括时钟中断。

The signal value is latched when the system clock goes low.
的信号值被锁存时，系统时钟变低。