Exemples d'utilisation de Terminal block en Anglais et leurs traductions en Français
{-}
-
Colloquial
-
Official
Inputs: Plug-in screw terminal block for 0.14.
Secure the Functional Earth(FE) ground wire to the terminal block screw.
Tighten screws securely to the terminal block.
An adapter jack 3.5 mm 4 pole TRRS to terminal block screw 4 points.
Electrical connection found behind terminal block cover.
Hitaltech provides kits of terminal block.
insert the cable ends fully into terminal block.
Check the power supply or the connection of the power cord to the terminal block.
Electric Connection found behind terminal block cover.
Feed range cord through hole and strain relief up to terminal block.
Disconnect the speaker wire from the terminal block connector.
Mm or 14.5 mm according to terminal block type.
I/O connector(external)- 6-pin configurable I/O terminal block, which is connected to the camera through the multi-connector cable.
typically 2.4 W max., via connection terminal block using Phoenix screw terminals note.
Pin terminal block used for power input to the video decoder with the supplied power adapter
Locate the terminal block on the rear of the unit
Pin terminal block for the RS232 serial interface used to control auxiliary equipment.
Loosen the screw e of the terminal block w, insert the lamp cord t into the washer r as far as it will go, and then tighten the.
Locate the terminal block on the rear of the unit
Clearance is required for the terminal block located at the right rear of the cooktop.