Examples of using Threaded connection in English and their translations into Arabic
{-}
-
Colloquial
-
Political
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Hanry Vickers, in 1936, invented pilot operated pressure valves as threaded connection series hydraulic control components.
Tubing is the simplest part of OCTG and it is normally found in the segment of 30 ft(9 m), with threaded connection at both ends.
If it is not, it is usually provided by the threaded connection for the installation of the valve device.
The next step is to thoroughly clean the remnants of the old sealant with a threaded connection and the new reel.
even directly to the spout, permitting a threaded connection.
The seal of the threaded connection electric diaphragm pump sealing is gasket,
D03 Subplate bottom ported is used for equipped with NFPA D03 valves with bottom threaded connection.
The threaded connection valve is within the screw to connected devices by connector and pipeline.
The hydraulic valve subplate is often to connect modular directional valves(The subplate converts it into threaded connection.) with piping.
Female threaded connection.
Vertical hydraulic oil check valve DXF series is used for hydraulic oil, one way check, vertical threaded connection isolated valve, usually installed in front of the hydraulic
Rexroth Directional Valve coils of solenoid for single-phase full-wave rectifier bridge DC power supply voltage to 220V control circuit, Rexroth Directional Valve coils for hydraulic power valve components, it is fitted in Germany Rexroth series, with same diameter threaded connection.
Oxygen acetylene Cutting Torch uses a threaded connection structure, so it is not necessary to remove the handle when changing the operation, so that the transformation of the welding operation becomes faster.
The load on each thread can be evenly distributed on the specified length, thus strengthening the internal thread and damping, so the fatigue strength of the threaded connection can be improved.
RV10-22 pressure relief cartridge valve is designed as pressure direct-acting, poppet function type, screw-in/threaded connection and cartridge style installation used for pressure relief valve to limit the hydraulic pressure in a presetting pressure in hydraulic circuit.
Check the apparent quality of the Roller Cone Bit, threaded connection thread is intact, Tungstan carbide Roller Cone bit whether the mutual bite or Kuang move, the weld is intact; with a bit gauge cone roller bit diameter.
Valves designed according to this design form have their valve body and valve cover connected by bolts and nuts, and wound-type gaskets sealed; The design is a welded valve cover with a threaded connection between the valve body and the valve cover, and a full welded seal extended forged steel gate valve.
NPT Threaded Connection Type.
CONNECTION TYPE: Threaded Connection.
For threaded connection(screw-in thread).