Examples of using Orifice in English and their translations into Bengali
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
deformation balance hole or the orifice is blocked.
micro orifice, and the automated spring pressure make injections with'THE SERA' virtually painless.
When the compressed air is turned on, it enters the rear air chamber through the orifice.
Flood the pulp chamber with the appropriate solvent and probe the canal orifice with an explorer to check if the paste has been effectively softened.
Due to the action of the constant pressure pipe orifice, the outflow speed of the pressure relief hole is greater than that of the decompression chamber.
A direct acting solenoid valve USES a plunger in direct contact with the inlet body opening, called a orifice.
Screen Nozzle, Water Strainer Nozzles are installed in a vessel orifice plate.
peelable tamper evidence orifice seal.
meat to cutting board, by rotating the extrusion orifice plate and screw Auger operation,
0.9 meter slide frame and orifice support device,
When the compressed air is turned on, the compressed air enters the rear air chamber through the orifice, and the air chamber pressure closes the diaphragm to the output port of the valve.
When the compressed air is turned into the rear chamber through the orifice, the rear chamber pressure closes the diaphragm to the output port of the valve,
the pressure relief orifice releases air, but the pulse valve does not spray, and the treatment mode is to replace the throttle orifice.
From its definition we can quickly know that the full bore will have less pressure drop andreduced bore will have more pressure drop since reduced bore is just like a restriction orifice that narrowing at the middlepart.
Clean the orifices thoroughly with the solution and rinse it with adequate water.
Orifices feed the sludge to.
Clean the orifices thoroughly with the solution and rinse it with adequate water.
Adjustable-flow orifice- no need to change orifices to regulate water flow.
for superior flavor and moisture retention, pin-hole orifices for low viscosity products and nozzle seals with an option of hot foil stamping.
Tube Shoulder Orifice 5mm.