Examples of using Subnets in English and their translations into Chinese
{-}
-
Political
-
Ecclesiastic
-
Programming
In the heart of the“old-time” Internet, there is already a globally distributed network of IPv6 subnets that are connected through tunnels.
In many cases, this leads to a lot of wasted host addresses, since our subnets may vary widely in size.
Typically this includes only your local subnet, but it can also include other subnets.
You can quickly see that you have the ability to create a lot more subnets than with the Class C network.
After creating an Amazon VPC, you can add one or more subnets in each Availability Zone.
This means the values of all zeros and all ones in the subnet field should not be assigned to actual(physical) subnets.
For the purposes of this answer, building our subnets is our only major concern.
Traditionally, all subnets of the same network number used the same subnet mask.
If the client and server are on different subnets, a DHCP Helper or DHCP Relay Agent may be used.
As a result, organizations can easily move their subnets to the cloud while preserving their existing IP addresses and topology in the cloud.
IP subnets should be segregated into separate broadcast domains via the use of separate switches, or VLAN's.
A subnet can only be associated with one route table at a time, but you can associate multiple subnets with the same route table.
HPC-X now enables applications to scale beyond a localized cluster resource and run across unique subnets of HPC clusters.
For instance, you could use two bits of the host part for the netmask, giving you 4 possible subnets with 64 hosts on each.
If the repeater fails, it will have an impact on the work of the neighboring two subnets.
Those, in turn, are able to use the next 16 bits of address for the organization of their subnets.
IP networks also can be divided into smaller units called subnetworks or"subnets.".
In all of the previous examples of subnetting, notice that the same subnet mask was applied for all the subnets.
Traffic between subnetworks is exchanged or routed with special gateways called routers which constitute the logical or physical boundaries between the subnets.
With VLSM, the network is first subnetted, and then the subnets are subnetted again.