Examples of using Subnets in English and their translations into Norwegian
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
as well as subnets, access control policies
You can find out what IP addresses and subnets your company uses by asking your network administrator.
given a TCP/IP network address and the number of subnets or nodes per subnet required.
network printers on the local subnet as well as those configured for use on remote subnets from this system.
If you put computers with IP addresses that should be on separate subnets on a local network with each other,
develop networks and subnets.
Optional: Give access to the new RPC dynamic port range for specific subnets if access is needed.
not subnets.).
Note that the computer cannot communicate with computers on other subnets, or with computers that do not use automatic private IP addressing.
Addressed issue where the Privacy Separator feature of a Wireless Access Point does not block communication between wireless devices on local subnets.
Optional: Give access to the RPC Endpoint Mapper for specific subnets if access is needed.
configure the network adapters to be on different logical subnets.
the public IP subnets for these endpoints must to be advertised to Microsoft over ExpressRoute.
In the Subnets tab make sure your LAN details are present then tick all boxes from the Trusted Subnets list.
In the Subnets tab make sure your LAN details are present
If you enable subnets to reach the RPC Endpoint Mapper
one-time setup of Network Security Groups(ACLs) on your subnets, without continues management.
This option is intended to be used to connect to machines in different subnets or in those rare cases when your network configuration prohibits the sending of broadcast messages which Simidude uses to find other clients.
For example, in a network with multiple subnets where nodes A and B are located in one subnet
you divide your network into subnets that enable you to use one block of addresses on multiple physical networks.