Examples of using Amplifier system in English and their translations into French
{-}
-
Colloquial
-
Official
MASTER OUTPUT(BALANCED)- Use XLR or balanced¼”(TRS) cables to connect this Master output to a speaker or amplifier system.
And, in addition: HBM has focused on the development of new products- for example the award-winning QuantumX amplifier system- for increased efficiency
Use a guitar cable to connect the DG-1000's OUTPUT jack to the DS60-112's INPUT jack to create a 60-watt guitar amplifier system.
Use a guitar cable to connect the DG-Stomp's OUTPUT L/MONO jack to the DS60-112's INPUT jack to create a 60-watt guitar amplifier system.
Using Multiple DS60-112s Connect the DS60-112's SLAVE OUT jack to another DS60-112's INPUT jack to create a 120W high power guitar amplifier system.
part of HBM's QuantumX measuring amplifier system, works dynamically and precisely to acquire torque,
Stereo Guitar Amplifier System Since the DG-Stomp is equipped with stereo outputs, it is possible to set up a stereo(60W x 60W) guitar amplifier system by connecting a DS60-112 to the DG-Stomp's OUTPUT L/MONO jack,
they electrically connect it to the amplifier system.
you can set up a stereo amplifier system by connecting one AS60-112T to the AG-Stomp's OUTPUT L/MONO jack,
uses the same signal that is supplied to its LINE OUT L jack, connecting the DG60FX-112's LINE OUT R jack to the DS60-112's INPUT jack creates a 60W x 60W stereo guitar amplifier system.
On-site calibration of your amplifier systems.
The DS60-112 can also be used to upgrade existing guitar amplifier systems.
This handbook is intended to give you a detailed guide to using both the A38 Integrated Amplifier and P38 Power Amplifier systems.
With controlled warm-up time, these rugged 8 pin octal based tubes may be used to good effect in push-pull or single-ended amplifier systems.
Amplifier system distortion at nominal output THD+N.
Separate signal amplifier system and individual LED light of each channel.
With a single amplifier system, an AMP ID is not necessary.
Switch on the amplifier system with the POWER switch 10.
Turn on the TV, the DVD player and the Audio Amplifier System if any.
The rugged, mobile Somat eDAQ amplifier system from HBM was used for data acquisition.