Examples of using Display will flash in English and their translations into French
{-}
-
Colloquial
-
Official
once and the display will flash.
Press“SET” button(4) once and the display will flash.
When the batteries are replaced the tool will come up in Absolute Mode and the display will flash until the DATUM button is pushed.
If the BPM count cannot be detected automatically, the display will flash at the previously detected value.
The display will flash if the probe is inserted into the outlet
the Personal data number will be displayed, and the display will flash.
after a power cut, the display will flash.
Once the value has been set, the display will flash for 5 seconds
all LEDs and the Segment Display will flash three times briefly indicating the new step has been inserted into this chase.
the BEAT value shown on the upper left corner of the display will flash.
the lighting of the display will flash as well as the exclamation point,
The display will flash for 5 seconds,
the last two digits of the Segment Display will flash to indicate MIDI channel setting is ready.
If the sensing option is not available with your selected programme, the display will flash and the buzzer will beep three times.!
Once selected, the display will flash for approximately 5s before showing the current internal temperature of the cellar.
the hour portion of the display will flash.
all LEDs and the Segment Display will flash three times briefly indicating that the step has been deleted.
If the Timed Dry option is not available the display will flash and the buzzer will beep three times.
the minutes portion of the display will flash.
all LEDs and the Segment Display will flash three times.
