Examples of using Flash mode in English and their translations into French
{-}
-
Colloquial
-
Official
this unit remains in manual flash mode even if the recording mode of the camera is changed to A automatic mode. .
The flash can be triggered in automatic flash mode, in manual flash mode
The flash unit supports the wireless Nikon remote system in slave flash mode and is compatible with the Nikon system„Advanced Wireless Lighting“.
The registered contents are added to the Flash mode as the Custom mode. The Custom mode is indicated with the or mark in the Flash mode area.
The flash unit always switches on afterwards with the mode of operation that was used last e.g. manual flash mode M.
Thereafter, the flash unit always switches on with the mode of operation that was used last e.g. TTL flash mode.
The TTL flash mode with metering pre-flash with the digital Leica M- models is a further development of the standard TTL flash mode of analog cameras.
exposure compensation, and flash mode.
For this, mount the M400 in the hot shoes of the camera and set wireless flash mode WL on the camera.
HSS can be additionally activated in E-TTL flash mode and the M or MLo manual flash mode of the flash unit.
Flash mode indicator(-PP. 21-23)
Ex: Using the flash mode button 1 Turn the control dial while holding down to select the flash mode. .
You can set the flash mode by selecting[] on the Camera menu.
Flash mode: Choose a setting that disables red-eye reduction and ensures that the fl ash will
If you see any flash mode indicator on the LCD panel,
Frame counter, Flash mode, Red-eye Reduction,
Set the flash mode to[OFF] if you do not want the flashes in the group to be used.
Other functions, such as the flash mode and metering, can be adjusted manually.
When the flash unit is in a flash mode that supports TTL metering,
To change the flash mode, in the active toolbar, select the desired flash mode. .