Examples of using Selected value in English and their translations into French
{-}
-
Official
-
Colloquial
For each selected value of a and b,
press to save the selected value, or press until you return to the navigation screen if you wish to keep the old setting.
For a selected value of M, σR will be chosen
select the temperature, with a range from 10 C to 30 C, and">room temperature is maintained at the selected value.
MENU PRE-TRAINING MODE DURING TRAINING l Move through selection lists l Adjust a selected value l Move through sports list l Change training view.
room temperature is maintained at the selected value.
will enable the scrub system and set the scrub pressure to the last selected value.
This parameter prevents the system against overpressure in case the HYDROVAR has been parameterized incorrectly: if this selected value is reached, an immediate shut-off of the follow-up-pumps is executed.
The team identified several ways to improve the position of women and men within selected value chains by mapping out the entry points of women,
Facilitating training of actors along selected value chains focus on strengthening the capacities of farmers,
Selected value chains include natural ingredients,
In addition to this, economic incentives can be put in place for investments in the selected value chains, such as tax exemptions
carefully analyse changes in roles of men and women in the selected value chain over the course of the project.
By pressing the SET key(3) again, the selected value is confirmed
Press the“Light” key once again to confirm the selected value and to continue the programming of the start delay, compared to time“0”,
The energy dose rate can be changed with the“+/-” keys. The SET key confirms the selected value. The selected dose automatically appears as a flashing value in the display as the therapy time required for the selected output.
economic performance; and to formulate a strategy for the upgrading of selected value chains, while considering the regulatory and institutional dimensions;
search off),“M”(manual point search) and“A”(automatic point search). See the chapter“Point Search”. By pressing the SET key(3), the selected value is confirmed and stored.
Clear the selected values by holding MAX/MIN pressed.
Set the selected values in the Video settings mode.