Examples of using Sensors and actuators in English and their translations into French
{-}
-
Official
-
Colloquial
communicate with sensors and actuators would be difficult.
The bus coupler for MODBUS TCP Remote I/O LB8111A2 brings inputs and outputs from sensors and actuators to Ethernet and enables Modbus communication via Ethernet.
make sure that the sensors and actuators will run only one at a time.
The variably usable inputs and outputs enable reading and controlling sensors and actuators of all kinds.
useful tips on sensors and actuators.
can communicate directly, with sensors and actuators, of all kinds.
The MCU system consists of a computerized control module(MCU), sensors and actuators.
IO-Link is a manufacturer-independent point-to-point communication system used to connect sensors and actuators to an automation system.
The parameters of the sensors and actuators are device-
They are using middleware created by Leti to interface the application with sensors and actuators for home automation systems,
Energy harvesting switches, sensors and actuators that supply necessary information for the IoT from billions of measuring points form an important element of this development.
That's why we're developing ambient artificial intelligent systems, which use an array of electronic devices- sensors and actuators- incorporated into everyday objects such as cabinet doors,
Any electrical failure of a component(e.g. sensors and actuators, dosing control unit)
Any electrical failure of a component(e.g. sensors and actuators, dosing control unit)
An OBD system meeting the emissions-OBD requirements of this gtr would be expected to monitor the engine's electronic sensors and actuators and to monitor the exhaust after treatment devices for their proper operation.
IO-Link, a standardized point-to-point serial connection protocol for sensors and actuators, is enabled on all PNP devices at no additional cost,
coaches not only includes sensors and actuators, but also switches
your PC, and all the sensors and actuators you wish to connect;
Sensors and actuators that are always on,
On the motherboard there is an interface S-BUS allowing the connection of S-BUS modules to manage sensors and actuators by only one bus of four wires carrying both the alimentation(12 V DC)