Examples of using Slave mode in English and their translations into French
{-}
-
Colloquial
-
Official
It doesn't support other GPIB featrues like slave mode or serial poll, which allows to lower its cost.
Slave mode does not need to be set on fl ashes on Phottix Odin receivers,
For the master/slave mode the spotlight is factory-set as a slave unit.
In slave mode, there is no indication of reach
In the master/slave mode, set the master unit to ON;
Note that in Slave mode when SELECT=OSC3,
UP button to select slave mode 1 or slave mode 2.
M(slave mode), Multi slave mode.
If the UFP-V is used in slave mode, only one host-master may be connected.
In the master/ slave mode, multiple RGBL-430DMX can be operated synchronously in the operating mode PROGRAM or SOUND.
Flash unit mounting foot S60(Order no. 000000607) Flash unit mounting foot for slave mode.
the rest of the adaptors must be in slave mode.
In the master/slave mode, several units STROBE15LED may be operated in sync.
The LED SLAVE(9) will light up when the spotlight is operated in the slave mode.
The unit in Slave Mode will follow the unit in Master Mode any other mode except DMX Mode and Slave Mode.
together with multiple PARL-20DMX master/ slave mode.
then press ENTER to activate slave mode.
while the slaves will be set to operate in Slave mode.
together with multiple RGBL-430DMX master/ slave mode.
It can also be operated without controller, either as an individual unit or interconnected with several STROBE-15LED units in the master/slave mode.
