Examples of using Thicknesses in English and their translations into French
{-}
-
Official
-
Colloquial
Thicknesses: 15mm, 4 of which are in hardwood- 20mm, 6 of which are hardwood- 11mm, 2.5 of which are hardwood.
Thicknesses: 16mm, 4.5 of which are hardwood- Width:
enabling machining with ceramic thicknesses minimized.
weights and thicknesses provided the items remain within the same weight category.
The Kanchan composite tried out had two thicknesses, i.e. a 350 millimetres(14 in)
They come in different thicknesses and can be manufactured in different colours(like the present opal)
High production output is achieved with all metal thicknesses up to 25mm and with tabular pieces.
Do not use any pipe with a wall thickness less than these thicknesses due to insufficient pressure capacity.
Higher strength steels, reduced and/or variable sheet metal thicknesses, aluminum, composites
The mix is applied in thicknesses of 50 to 90 mm,
Suitable for ceiling thicknesses between 1 and 22mm 3 x 1.2W model, 1-25mm.
Such plaster thicknesses occur on historic buildings when the plaster layer had unevenness in the masonry,
For sheet thicknesses less than 6 mm. the maximum angle recommended is 90º.
Easy to install: Nano Air 50 is suited to all wall thicknesses(250 to 470 mm)
So, Germany transmits a modified proposal on absolute minimum wall thicknesses in the light of the Spanish ideas.
Perform calculations autonomously to determine the minimum wall thicknesses of all the main components of pressure vessels based on pressure
With such a wide range of hues and thicknesses, these fretted slabs can fulfil any designer's requirements.
If bolster plates of lower thicknesses are used, then the bolster plate must meet the requirements from ISO 1726 Teil 1-3
Higher figures concerning minimum wall thicknesses if common aluminium alloys are used.
28 mm thicknesses, almost seem to float