Examples of using Current density in English and their translations into Greek
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Financial
-
Official/political
-
Computer
The small size sets a natural upper boundary on power consumption due to heat caused by the high current density and need for a heat sink.
or the charge or current density in the Lorenz gauge of electromagnetism.
Research indicates that increasing the current density under the membrane can only contribute so much to the total absorption of a specific drug molecule,
since copper ions are easily deposited rapidly in the edge portion of the pores(that is, a high current density region), the deposition speed of the central portion of the pores(i.e., the low current density region) is relatively slow.
the maximum current density associated with the pulses can be calculated from the rise/fall times
frequency of the field, the physical quantities used to specify these restrictions are current density(J), SAR, and power density(S).
frequency of the field, the physical quantities used to specify these restrictions are current density(J), specific energy absorption rate(SAR),
The high current density of 20 milliamps per square centimeter of the material has been proved to be highly beneficial for devices which need rapid charging and discharging in addition to high-power density. .
such as Al3+ should be controlled below 10g/L, the current density control in 11A /dm2,
the unit diffusion distance of the resistance and ground current density is close to zero,
Typically 20 years when operating at an anode current density of 100 A/m2 coating loading can be adjusted for any combination of current output
A unique cross-over-free beam path gives extremely high beam current densities of about 20,000 A/cm2 delivering ultra-high patterning resolution in combination with increased lithography throughput.
At low current densities krypton flashlamps have higher output in those bands than do the more common xenon lamps,
Graphene can sustain current densities 6 orders higher than copper,
Electrodeposition was carried out galvanostatically at current density of 15 mA/cm2.
Wire current density: most electronic circuits are now insulated with copper.
Beryllium Copper is often used as high current density spring material.
High current density, low impedance
The induced current density can then be compared with the appropriate basic restriction.
Ampère's Circuital law relates the magnetic field to its source, the current density.