Examples of using Current density in English and their translations into Italian
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Programming
-
Official/political
the app plots the billet temperature and current density during the processing.
low current density, and low pressure operation currently plaguing the alkaline electrolyzer.
For example, the Ideal Schottky boundary condition is applied on the left boundary of a rectangular domain with a uniform material and current density.
the average cathode current density greater than 0.05 A/ sq.
Current density is measured in pA∙pF-1(picoamperes per picofarad),
peak current density values can be obtained by multiplying the rms value by2~1.414.
The maximum current density in the sheet is on the order of 10-10 A/m² 10-4 A/km².
The exchange current density is the current in the absence of net electrolysis and at zero overpotential.
Where the primary ion current density is so small that only a negligible fraction(typically 1%) of the first surface layer is necessary for surface analysis.
The current density is automatically evaluated by the module through adding all contributions from the transport of ions to the current density. .
Allows for secondary and tertiary current density distributions to be produced,
pulse duration, and current density its possible to maximize the output for many application areas.
The Secondary Current density interface can also be fully coupled to gas phase transport, using the Maxwell-Stefan equations, in the pores in gas diffusion electrodes.
Besides, the electric field distribution uniform, low current density, uniform heating,
can withstand 1000A/M2 current density.
the life of the noble metal oxide coated titanium anode depends on the working current density, temperature and bath composition.
Joule-heated thermal actuator is shown at the top while the visualization at the bottom shows the current density distribution.
If the fluid speed is increased, for a fixed current density, and all other parameters remain the same, the coating appearance changes systematically,
the high current density creates heat,
In the operation, when the current density is too high,