Examples of using Current density in English and their translations into Romanian
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Programming
To assess the claimed efficiency of an electrolyser it is important to establish how it was defined by the vendor(i.e. what enthalpy value, what current density, etc.).
the symmetric stress- energy tensor acts as the source of spacetime curvature, and is the current density associated with gauge transformations of gravity which are general curvilinear coordinate transformations.
An example of a tensor density is the current density of electromagnetism.
The current use of the chip is actually related to the current density flowing through the chip, the chip is small, the current is small, the chip is large, and their current density is almost the same.
This is more stable for high-power LED current injection, the current density is smaller, and can reduce the cost of playing gold, thin film package can be lightened.
the anode for cathodic protection has a service life of≥20 years at a current density of 100 A/m2;
wires, and share some current during plating, so that the current density of a few independent conductors Not too high,
to purify the wastewater, then the current density is 26a/m2.
Two, greatly increasing the current density of diaphragm chlor alkali production process,
can operate at higher current densities, and can therefore be possibly cheaper if the hydrogen production is large enough.
High current density, high productivity.
(4) Operation at high current density;
The mixed metal oxide can be operated at high current density, such as 2000A/m2.
In the case of higher current density, it can also guarantee a long service life.
Anode top hooding when high current density anodes are used, connected to the treatment in BAT 67 Description.
The maximum permissible current density of copper in open air is approximately 3.1×106 A/m2 of cross-sectional area.
Polarizability of potential difference: less than 40 mV(test the potential difference under the current density of 200 A/M2 and 2000A/M2.).
It can be used at high current density to increase the utilization rate of the electrolytic cell
It also has other advantages such as low current density, superior power saving,
TE's ELCON Micro power connectors are wire-to-board connectors that deliver high current density of 12.5 A per pin in an industry-standard 3 mm contact pitch.