Examples of using Current density in English and their translations into Portuguese
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Official/political
The excessive current density at the contact causes local overheating,
in the high current density electrolysis, the use of titanium anode is more appropriate.
This is the distance in the interiorof the material where the current density is reduced to1/e(0,37
Further studies analyzed serpentine and interdigitated channel patterns in 5 cm² cells and their influence in current density uniformit.
J is current density.
sensing in the pacemaker because of exposure of the myocardium to high current density.
The simulations identify a temporary phenomenon do not described in the literature, a bigger current density in regions faster from the counter electrode attributed to the difusional phenomenon slow.
For example, the Ideal Schottky boundary condition is applied on the left boundary of a rectangular domain with a uniform material and current density.
shape as well as current density.
the life of the noble metal oxide coated titanium anode depends on the working current density, temperature and bath composition.
When the current density is higher than 75A/dm2
the system performs a calculation with the variables of current density and loss of SF6 daily average density,
thermal conductivity in order to increase the current density and reduce the effect of electrode heat dissipation this side; 3.
added to the Magnetic Fields interface, the magnetic current density is projected onto a boundary surface,
First, we considered two profiles for the plasma current density, studied in the literature:
formula_12where J is the"total" current density and the energy density"u" is:
Long life: the LED chip current density is controlled below 35A/cm2, when the LED
The plot shows surface current density and direction on the coil boundary,
In addition, molybdenum electrodes surface temperature is connected with surface current density, so the higher the temperature, and the greater the surface current density,
related to the cells parameters such as current density(Jsc), open circuit voltage(Voc),