Examples of using Small cracks in English and their translations into Hungarian
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Financial
-
Programming
-
Official/political
-
Computer
because there are small cracks, scratches, corrosion.
Moreover, the acrylic is more suitable for large cracks and small cracks close up the well with silicone.
It securely closes wall defects(small cracks), increase the reliability of partitions of relatively brittle material(drywall, plywood, polystyrene).
Therefore, if you notice itchy and burning small cracks, you can be sure that these are the initial symptoms of ringworm.
The cave has a relatively large dome and small cracks are visible through which the sunlight illuminates this unique cave.
We conclude that if the ceiling surface is slightly"bumpy" or small cracks, it is better to give preference to the matt version.
There are some minor signs of premature deterioration, such as small cracks and excess bitumen appearing at the surface.
then solder the small cracks with a soldering iron,
The lips do not dry out and small cracks, which may have been caused by dryness, heal quickly.
Very small cracks are difficult to fill with this as it must be pushed into the crack with a trowel
Even small cracks can remove insects with a strong stream of air, such as a vacuum cleaner.
Remember that welding sparks and hot materials from welding can easily go through small cracks and openings to adjacent areas.
cleans also the recesses and small cracks.
It protects the material from getting wet in the rain, as well as small cracks on the walls blowing.
That is why you can wipe the skin of your hands with this oil to soften it and heal small cracks and sores.
heat leakage, do it to keep moisture and small cracks at the proper distance.
Flooring should be such that at the junctions of the elements was not even small cracks.
Ultrasonic waves clean complex molds, all small cracks as well as the recesses with limited access.
If your wall formed small cracks that resemble cobweb,
Modern engineers have devised production methods which allow them to put a compressive residual stress into regions of new components where small cracks might develop and thus improve the lifetime