Examples of using Operating conditions in English and their translations into Korean
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
In the past, electromechanical limit switches or potentiometric sensors were frequently used, but they are often unreliable in unfavorable operating conditions.
than 20 K and is dependent on the heatsink and operating conditions.
Their profile design, the quantity mounted& the combination/selection of materials are all determined by the operating conditions.
Based on these models and operating conditions, the optimal values are calculated by applying mathematical programming, and implemented online by the advanced control system.
Again, it is critical when sizing the VFD to know as much about the operating conditions as possible.
The listed values in the material properties are valid for optimal operating conditions.
Make tungsten carbide as the main material can better adapt to pump operating conditions.
Keep up the definition of premises and operating conditions of outdoor commercial activities(farmers' markets and fairs).
Even in operating conditions with heavy soiling, dust or mist the sensors detect objects reliably and without interference.
Two pieces of the same equipment at similar locations and operating conditions exhibit different vibration levels after several years of operation.
They are built to resist the most severe operating conditions created by the ambient environment and the process medium.
It tracks the most important operating conditions and indicates early if something is off from the standard or expected result.
Increase your efficiency through fully automatic vessel design optimization under all installation and operating conditions.
Visualize pipe stress analysis results graphically for hot and cold operating conditions.
Whenever the natural operating conditions are very harsh, the DF 3500 provides excellent protection from water.
It is not intended that access control be used under normal operating conditions.
The groups will be interrupted, as operating conditions permit, and each outage is expected to last about one hour.
Self-propelled machine must be designed and constructed in such a way that the specified operating conditions maintained its stability.
Heating rates of 500 K/min allow these extreme operating conditions to be analytically reproduced(figure 10).
The stress levels and temperatures are selected to appropriately address gas turbine engine operating conditions.