Examples of using Recrystallization in English and their translations into Polish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Financial
-
Official/political
-
Programming
-
Computer
not be too high, generally 50~200℃ below the recrystallization temperature, about 450~650℃.
which can prevent the recrystallization of the tungsten wire.
yttrium molybdenum alloy such recrystallization temperature, and after recrystallization structure is good.
only a-phase solid solution strengthening can be achieved by recrystallization annealing.
Doped molybdenum oxide on the recrystallization temperature and anti-sagging performance impact is very large,
Rolling method and direction TYM molybdenum alloy recrystallization temperature and high temperature performance there is a very significant impact,
TZM alloy recrystallization temperature is about 250℃,
Titanium molybdenum alloy material has a higher temperature than pure molybdenum recrystallization temperature strength
reducing stress concentration, recrystallization annealing temperature of 1500℃ or more.
Tungsten is generally worked below its recrystallization temperature, because recrystallization is combined with grain boundary embrittlement.
The mechanical properties of the TC4 alloy after 1-2~h holding at 750~800 °C for air conditioning(recrystallization annealing) are good.
TZC has excellent high temperature strength and high recrystallization temperature, also has a good plasticity at room temperature.
The lanthanated doped molybdenum rods are targeted for use in higher temperature applications where ductility is retained after recrystallization for material with smaller cross sections.
TZC alloy has excellent high temperature strength and high recrystallization temperature, also TZC has a good plasticity at room temperature.
organizational structure and the relationship of the recrystallization temperature is as follows.
dynamic recovery and recrystallization, and void nucleation and length.
eliminated by homogenization annealing or deformation recrystallization;
dynamic recovery and recrystallization, and void nucleation and growth.
eliminated by homogenizing annealing or deformation recrystallization;
Grains of pure molybdenum occurs at 1 200℃ recrystallization from processing state fibrous tissue becomes equiaxed organizations,