Examples of using Horizontal plane in English and their translations into Romanian
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Programming
their magnetic field is in a horizontal plane.
Thus, our growth“from below up” begins, while before that, we were developing only on the horizontal plane.
It is important that each had the same slant of the roof rafters with the installation of all in the same horizontal plane.
in that case a brush it is necessary to move in the horizontal plane.
A horizontal plane A1 B1 B2 A2,(810+ av)
After fixing the pattern in a horizontal plane, take a powder of coal
This ability to control his body in a horizontal plane(circling) and rotations in the vertical plane(doing flips).
The guide profiles are arranged in a horizontal plane by attaching them to the floor
Formwork make only prostupenkov- side surfaces of steps above a horizontal plane so that the steps to fill the plate.
As described in the article works beacons were placed on a horizontal plane and the risers used as a second beacon, as the height of risers, approximately the same.
with the objective of sliding on a horizontal plane above the clip for safety reasons.
The reference point is defined as the point in the median longitudinal plane of the seat where the tangential plane of the lower backrest and a horizontal plane intersect.
the bypass is installed in a horizontal plane.
In carrying out this manipulation of both panels should lie on a horizontal plane.
Manzoni- his elegant project Circe(Circe) works in a horizontal plane unlike his counterparts.
the challenge remains giving special gloss horizontal plane, you can either paint the ceiling in a new way, or to paste it first wallpaper(texture)
The hot sale gravel driveway black hdpe grid geocells are laid on the horizontal plane of each step, and the reinforced facade effect of the geocells is used to better solve the problem of uneven subsidence.
Ground reference level' means the horizontal plane parallel to the ground level,
Two portions of the horizontal plane passing 300 mm above the plane defined in point 1.6.2.8,
Furthermore, it is possible to set a certain spread from the horizontal plane- this is sometimes useful especially when welding difficult nodes directly on the installation site.