Examples of using Backing paper in English and their translations into Spanish
{-}
-
Colloquial
-
Official
You would see plum blossom. shaped watermarks on the backing paper.
Upgrade laminating with a waste rewind for laminate backing paper.
Pick up the decal with the backing paper and slide the decal from the paper on to the ware.
Remove the backing paper from the foam, and place the adhesive side of the foam pad onto the back of the speaker housing.
Peel the backing paper from the back of the tape to expose the adhesive.
When tearing the backing paper, pull it in the direction of the arrow shown in the illustration I as you tear it.
When applied on the cloth, the backing paper can be used to protect it.
Otherwise, the backing paper may move to one side,
Remove the backing paper from the floor marking
Motifs and fonts are printed in CMYK on a backing paper and then transferred to the fabric with a transfer press.
Repeat steps 1 and 2 until the backing paper works free from the label.
where the backing paper will not accumulate near the paper exit.
fonts are printed in CMYK on a backing paper and then transferred to the fabric with a transfer press.
Then peel off the backing paper from the abrasive disc
Then peel off the backing paper from the abrasive disc and attach the abrasive disc to the pad.
Attaching Remote Control Sensor 1 Remove the backing paper from the Velcro tape on the.
Remove the backing paper from underneath the flange, smooth the flange first with hand pressure,
Remove one side of the backing paper and press the tesa Powerstrips firmly onto the felt decoration.
Peel off the backing paper from the spacers and attach the adhesive face to the unit as illustrated below.
select the thin donut-shaped protection pad with white backing paper.