Examples of using Brew button in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Press the BREW button and allow brew cycle to run.
Momentarily press and release the BREW button.
The brew buttons(24)&(25) start flashing on the control panel.
The Power and Brew buttons will illuminate.
The BREW button light will come on to show that the coffee maker has.
It will be automatically set after 5 seconds or by pressing the BREW button i.
At the end, your machine will beep 3 times and the BREW button(l) will turn off.
Plug unit into electrical outlet and press BREW BUTTON to start brew cycle
If desired, press the BREW button after the brew cycle is complete to turn off the warming plate.
press the BREW button, OR press the power switch on the rear right side of the coffeemaker to turn the coffeemaker off.
Press the flashing Brew Button.
Pressed Grind& Brew button, but nothing is happening.
What if I push the wrong brew button?
Fig.12- Press and hold down the brew button 14.
The programming of each brew button is independent from the other.
Release the dosed brew button and bring the lever back to the off position.
Fig.7- Press the brew button(18) again to end the op.
Press Grind& Brew button to begin brewing;
Open the hot water/steam knob(3) by turning it counterclockwise and press the brew button 15.
Push the brew button(15) and close the hot water/steam knob(3) by turning it clockwise.