Examples of using Pull the switch trigger in English and their translations into Spanish
{-}
-
Colloquial
-
Official
For continuous operation, pull the switch trigger and then push in the lock on button.
Hold the tool with one hand, pull the switch trigger while pressing the lock-off button,
Only to turn on the light, pull the switch trigger without pressing the lock-off lever.
To stop the tool from the locked position, pull the switch trigger(A) fully, then release it.
For continuous operation, pull the switch trigger, push in the lock button
Pull the switch trigger to light up the lamp.
For continuous operation, pull the switch trigger(in the B direction)
Pull the switch trigger to flow built-up dust
For continuous operation, pull the switch trigger and then push in the lock button.
For continuous operation, pull the switch trigger and then push in the lock button.
To cancel the unintentional restart proof, pull the switch trigger fully, then release it.
For continuous operation, pull the switch trigger and then push in the lock button from either side.
For continuous operation, pull the switch trigger(in the B direction), push in the
simply pull the switch trigger in the B direction.
When it is hard to turn the knob, pull the switch trigger half-way for running at low speed
press the lock-off lever and pull the switch trigger with the lock-off lever being pressed.
Position the bit at the desired location for the hole, then pull the switch trigger.
Once push drive is activated, pull the switch trigger and then push the lock button.
Position the bit at the desired location for the hole, then pull the switch trigger.
grasp the rear handle(the lock-off lever is released by the grasp) and then pull the switch trigger.