Examples of using Set value in English and their translations into Swedish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
-
Political
When the leak concentration reaches the set value, the instrument will emit a continuous alarm sound.
When the computer divides the random number by the set value, it records the remainder of the quotient.
The pressure regulating valves ensure that the pressure never exceed the set value and also ensure that the hydraulic oil can be returned to the tank.
The output voltage is kept constant to the set value with a permissible deviation of± 0,5% within a load range between 0% and 100% of the unit current.
of Category A tractors must be tested on a vibration stand using the appropriate set value signals.
ensure that equipment is strictlycomplying with the set value.
Soft start to rise slowly from the RF output 0 to the state of the set value.
The feeder protection relay triggers a magnetic switch to open the circuit if it senses a current higher than the set value.
a red LED indicates that the airflow dropped below the set value.
The BCP incorporates a single-pole changeover microswitch where the contact position depends on the pressure in the connection port and the range set value.
First, to apply the method of"design for the set value" wherever possible.
the amplitude will not reach the set value and may shut down if an overload condition is reached.
Wood's dehumidifiers will work only when the humidity level exceeds your set value. This keeps energy costs down,
When the room temperature air exceeds the set value, and the outdoor temperature is lower than the room temperature,
Dynacon Eclipse controls the flow automatically to the set value.
when monitoring the audio input is higher than the set value automatically resume recording.
If flow compensation(i.e. proportional control of sample flow) is used, it must be demonstrated that the ratio of main tunnel flow to particulate sample flow does not change by more than± 5% of its set value except for the first 10 seconds of sampling.
the accurate shut-down protection can be made according to the set value at high voltage side; If the current
Setting value to 0 will disable this feature.
The set values are shown on a display.