Examples of using Set value in English and their translations into Slovak
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
Also it could automatically alarm by setting the battery discharge to standby time is less than a set value.
The backwash cycle is usually triggered when the differential pressure over the filter exceeds a set value.
it may be lower than set value.
During the operation, the meter shows that the digital pressure does not reach the set value, which is caused by air leakage.
the lower row SV window display set value.
The set value for AF Micro Adj. is not reset when Camera Settings Reset or Initialize is performed.
If the actual value is lower than the set value icon flashes as a warning.
of Category A tractors must be tested on a vibration stand using the appropriate set value signals.
When the concentration of flammable gas exceeds the alarm set value, an audible and visual alarm signal is issued, and the on-duty personnel take safety measures
When the measured temperature value>(set value+return difference),the relay total
a series OSTRON. Set value 249 12 rubles consists of objects(fork, knife, spoon).
the amplitude will not reach the set value and may shut down if an overload condition is reached.
the warning buzzer alarms;when it below the speed limit(set value: 10km/ h), the warning buzzer does not alarm.
If the player wishes to quit playing the dealer will exchange the roulette chips for set value casino chips that may be used for playing at other tables of Olympic Casino or cashed in at the cashier.
However, a simulation test may also be carried out using a set value signal corresponding to the acceleration curve which was determined during the standard roadway test with the type of tractor for which the seat is intended.
In some cases, Predictive Cruise Control will permit the speed of the vehicle to fall below the set value; for example when the top of a hill has almost been reached
Processing method: Check the test item to reset the setting value.
It will take some times to make the voltage reach the setting values.
Block scenes- set values in green fields are not displayed properly.
Block scenes- set values in green fields are not displayed properly.